AGV Flooring for Automated Guided Vehicles
High Performance Resinous Flooring
The needs for AGV and AMR floor surfaces are numerous. These areas need a flat, level surface, that is not too slick, bumpy, too shiny or soft. Surfaces may need to be anti static, or dangerous accumulated charges could damage to sensitive electronic components. In order to manuever AGV and AMR vehicles/equipment, it requires lasers, magnets, sensors (RF or optical), or cameras. Predetermined pathways are designated with visual markers and GPS systems, or by means of magnet tape or embedded wire in the floor. Any of these conditions could cause slowdowns, stoppage, accidents or repairs.
PumaCRETE Corp. now has a solution to all of these challenges!
SOLUTIONS FOR THE FOLLOWING ISSUES:
Common issues that may be challenges for this equipment includes flooring that is:
- TOO BUMPY: Uneven, bumpy surfaces risk damaging the AGVs and AMRs. PumaCRETE flooring fixes cracks, joints, holes, damaged and spalled and rough concrete. These conditions speed up the wear and tear on wheels and components, increasing maintenance costs and downtime. .
- TOO SLICK
If the flooring is too slick, the vehicles may not have the traction required to move efficiently. They require a bit of surface texture (proper coefficient of friction) to ensure the wheels have enough traction to help the robot stay on course and move at designated speeds. 301-AGV PumaESD resurfacer provides a non slip surface with COF (coefficient of friction) >.6 - TOO SHINY
The gloss or sheen of your AGV/AMR flooring can causes issues. A too shiny surface will reflect more light and may confuse laser-guided navigation. Going with a matte finish can save you extra costs down the road.
301-AGV PumaESD resurfacer has a semi gloss finish. - TOO SOFT
301-AGV PumaESD flooring is a hard, abrasion resistant, composite flooring. It is not soft like VCT, rubber and sheet goods.
Advantages of PumaCRETE's High Performance AGV Flooring and AMR Flooring Systems
- CONDUCTIVITY- Systems available to comply with ESD standard DIN EN 61340-5-1 Systems are available in either d (dissipative 10e5-10e9 ohms) or c (conductive: 25,000-1M ohms) resistance ranges.
Contact us for for information on custom resistance requirements. - DURABILITY
All of our systems provide a highly durable and abrasion resistant surface, for polyurethane AGV and AMR wheels. - SMOOTH CONSISTENT SURFACE
The floor surface must allow the vehicle to move freely and safely.
FLOORING FOR WORN, DAMAGED CONCRETE
301-AGV PumaESD® flooring
This resinous flooring is a multilayered (composite) system, that can be applied to old damaged concrete, as well as new concrete surfaces.
This system also provides greatly increased resistance to gouging, scraping and other impact.
301-d AGV PumaESD Technical Data Sheet
301-c AGV PumaESD Technical Data Sheet
MasterFormat Specification (coming soon)
FLOORING for CONCRETE IN "NEW" CONDITION
201-d AGV PumaESD® (dissipative)
This 3 layer coating system is designed for new concrete (or slabs in new concrete condition).
201-c AGV PumaESD® (conductive)
This 3 layer coating system is designed for new concrete (or slabs in new concrete condition).
INSTALLATION OF YOUR AGV FLOORING
PumaCRETE flooring is installed by a nationwide network of certified installers. They can turnaround your area quickly, in many instances.
If you are interested in self installation:
PumaCRETE can provide low cost on site trainers, assistance with surface preparation, specialty supplies, tools/equipment, videos, and other training resources, for a trouble-free installation.
Contact us with the form below, for consultation on your AGV or AMR flooring project.